




Stick them on a bike, a scooter, a helmet or a backpack, then change colour from the handlebar. Micro USB to charge, velcro or rubber bands to mount, no wiring and no tools.

Enough to light a whole bike in one order — plus two ways to attach each light.

Colours are pre-sets on the remote, so you jump straight to the one you want instead of clicking through every colour in sequence.

Every colour has ten patterns and three brightness levels. Hold a steady colour for ambient light, or pick a pulse for a moving vehicle.

Every colour has its own button rather than a single cycling button, so you are not pressing through seven colours to reach the eighth. A single press changes all four lights at once.

No drilling, no wiring, no tools. Stick a hook-and-loop pad on a flat panel, or thread a rubber band around a handlebar, fork or frame tube and clip the light on.


| Product Type | Rechargeable RGB LED accent lights (4-pack) |
|---|---|
| Light Size | 41 × 26 × 13 mm (1.61 × 1.04 × 0.51 in) |
| Weight | About 9 g per light (0.02 lb) |
| LED | 2 high-brightness LED chips per light |
| Battery | 110 mAh / 3.7 V built-in, rechargeable |
| Charging | Micro USB, 5 V 1 A — about 1 hour to full |
| Runtime | Up to about 60 hours in the lowest flashing mode; far shorter on solid high brightness |
| Colours / Modes | 8 colours, 10 patterns, 3 brightness levels |
| Remote Range | Up to about 7 m / 23–26 ft |
| Mounting | Hook-and-loop pads + rubber bands (both included) |
| Package Includes | 4 × light, 1 × remote, 1 × 3-way cable, 1 × single cable, 4 × velcro pad, 8 × rubber band |
Stick them on, pick a colour, and change your mind from the handlebar.
Stick them on a bike, a scooter, a helmet or a backpack, then change colour from the handlebar. Micro USB to charge, velcro or rubber bands to mount, no wiring and no tools.

Enough to light a whole bike in one order — plus two ways to attach each light.

Colours are pre-sets on the remote, so you jump straight to the one you want instead of clicking through every colour in sequence.

Every colour has ten patterns and three brightness levels. Hold a steady colour for ambient light, or pick a pulse for a moving vehicle.

Every colour has its own button rather than a single cycling button, so you are not pressing through seven colours to reach the eighth. A single press changes all four lights at once.

No drilling, no wiring, no tools. Stick a hook-and-loop pad on a flat panel, or thread a rubber band around a handlebar, fork or frame tube and clip the light on.


| Product Type | Rechargeable RGB LED accent lights (4-pack) |
|---|---|
| Light Size | 41 × 26 × 13 mm (1.61 × 1.04 × 0.51 in) |
| Weight | About 9 g per light (0.02 lb) |
| LED | 2 high-brightness LED chips per light |
| Battery | 110 mAh / 3.7 V built-in, rechargeable |
| Charging | Micro USB, 5 V 1 A — about 1 hour to full |
| Runtime | Up to about 60 hours in the lowest flashing mode; far shorter on solid high brightness |
| Colours / Modes | 8 colours, 10 patterns, 3 brightness levels |
| Remote Range | Up to about 7 m / 23–26 ft |
| Mounting | Hook-and-loop pads + rubber bands (both included) |
| Package Includes | 4 × light, 1 × remote, 1 × 3-way cable, 1 × single cable, 4 × velcro pad, 8 × rubber band |
Stick them on, pick a colour, and change your mind from the handlebar.


























